FREE SHIPPING FOR ORDERS OVER $150 or $12 FLAT RATE SHIPPING.
Sunshine Decor-Weave
Sunshine Decor-Weave
$24.00

$34.95

Sunshine Decor-Weave

  • Sheet Size: 87.7cm x 55cm (34.5″ x 21.6″)
  • No of Pieces: 1
  • Package Size: 31.5cm x 25cm

    Instructions for Application

    Hokus Pokus new “Décor-Weave” designs will inspire you to upcycle your old, previously loved furniture from drab to fab!

    Hokus Pokus Décor-Weave designs are highly detailed expressions of art which can be applied to natural wood, painted furniture or a surface of your choice.

    Requirements for applying a Hokus Pokus Décor-Weave:

    1.) a piece of furniture or project which has been completed to a smooth finish, painted or sanded natural wood
    2.) a Décor-weave Design;
    3.) paint brush
    4.) brayer
    5.) water-based sealer
    6.) 400 grit sand paper;
    7.) clean water
    8.) clean cloth
    9.) Iron

    Optional extra is a glass of wine

    With the iron on a COOL, DRY (NOT STEAM) setting, gently iron the back of your Décor-Weave design to remove initial fold lines.

    The prepared furniture piece: wipe down with a wet cloth to remove all the dust.

    It is vitally important to remove all excess dust before applying any Hokus Pokus Décor-Weave to your project.

    Sharp pieces of wood splinters or chipped paint, no matter how small, can spoil the surface and texture of your Décor-Weave project.

    All painted surfaces must be 100% dry to avoid the Hokus Pokus Décor-Weave from lifting or creating air bubbles.

    Always plan beforehand where you are going to place your Hokus Pokus Décor-Weave and cut to size, if needed.

    Applying the Décor-weave: Apply a base coat of a good quality polyurethane water-based sealer, while still wet place the Hokus Pokus Décor-Weave in the desired place, ensure all air bubbles are removed by rolling with a brayer.

    Wait about 30 min then apply a 1st coat of sealer over the Hokus Pokus

    Décor-Weave, wait until 100% dry then apply a 2nd coat and 3rd coat, ensure the surface is completely dry as per manufacturer’s instructions – don’t rush this phase. Once 100% dried and cured, gently sand the whole design with 400 grit sandpaper to a smooth texture. Clean with a wet cloth.

    The last very important step is to sit back and enjoy your masterpiece!