FREE SHIPPING FOR ORDERS OVER $150 or $9.95 FLAT RATE SHIPPING.
Prima Balerina Decor-Weave
$29.95

Prima Balerina Decor-Weave

  • Sheet Size:              80cm x 60cm (31.5″ x 23.6″)
  • No of Pieces:            1
  • Package Size:          31.5cm x 25cm

Instructions for Application
Hokus Pokus new “Décor-Weave” designs will inspire you to up-cycle your old, previously loved furniture from drab to fab!
Hokus Pokus Décor-Weave designs are highly detailed expressions of art which can be applied to natural wood, painted furniture or a surface of your choice.
Requirements for applying a Hokus Pokus Décor-Weave:

  1. a piece of furniture or project which has been completed to a smooth finish, painted or sanded natural wood
  2. a Décor-weave Design
  3. paint brush
  4. brayer
  5. water-based sealer
  6. 400 grit sandpaper
  7. clean water
  8. clean cloth
  9. Iron

With the iron on a COOL, DRY (NOT STEAM) setting, gently iron the back of your
Décor-Weave design to remove initial fold lines.
The prepared furniture piece: wipe down with a wet cloth to remove all the dust.
It is vitally important to remove all excess dust before applying any Hokus Pokus Décor-Weave to your project.
Sharp pieces of wood splinters or chipped paint, no matter how small, can spoil the surface and texture of your Décor-Weave project.
All painted surfaces must be 100% dry to avoid the Hokus Pokus Décor-Weave from lifting or creating air bubbles.
Always plan beforehand where you are going to place your Hokus Pokus Décor-Weave and cut to size, if needed.
Applying the Décor-weave: Apply a base coat of a good quality polyurethane water-based sealer, while still wet place the Hokus Pokus Décor-Weave in the desired place, ensure all air bubbles are removed by rolling with a brayer.
Wait about 30 min then apply a 1st coat of sealer over the Hokus Pokus
Décor-Weave, wait until 100% dry then apply a 2nd coat and 3rd coat, ensure the surface is completely dry as per manufacturer’s instructions – don’t rush this phase. Once 100% dried and cured, gently sand the whole design with 400 grit sandpaper to a smooth texture. Clean with a wet cloth.